Zebra HC100 - Media Cartridges and Wristbands

61330M Printhead Assembly Maintenance Kit
Prepare for Installation
20
61311L-001 Rev. A HC100 Maintenance Manual 5/8/08
61330M Printhead Assembly Maintenance Kit
Installation Instructions
This kit includes the parts and documentation necessary to install the printhead assembly in the
HC100™. Read these instructions thoroughly before installing this kit.
Prepare for Installation
Parts List
Before proceeding, verify that your kit contains the items for your printer listed below.
Figure 3 • Kit Contents
Tools Required
! Item Qty
Part Number Description
Ref 1
61330M
2 in. Thermal Printhead Maintenance Kit
1 1
61259-12
2 in. Thermal Printhead
2 1
61248
Media Chute
3 1
61230
Printhead Lever Plate
Bold = Part available for purchase.
Italic = Part not available for purchase; listed and shown for reference only.
1
2
3
Tools • You need these tools to complete this procedure:
! Antistatic Wriststrap and Mat ! 47362* Zebra Preventive Maintenance Kit
* In place of the Preventive Maintenance Kit, you may use a clean swab dipped in a solution of isopropyl
alcohol (minimum 90%) and deionized water (maximum 10%).