Zebra HC100 - Page 72

61337M ZebraNet™ Internal Wireless Plus Print Server Assembly Kit
Remove the Wireless Radio Board
72
61311L-001 Rev. A HC100 Maintenance Manual 5/8/08
Remove the Wireless Radio Board
1. See Figure 43. Remove and discard the three Phillips mounting screws, standoffs, and
nuts.
Figure 43 • Remove the Wireless Board
2. Remove and discard the wireless radio board by pulling it out of the J1 connector on the
MLB.
1
Mounting nuts (3)
2
Spacers (3)
3
Antenna cable
4
Mounting screws (3)
5
Wireless board
6
MLB
7
J1 connector
1
2
3
4
5
6
7