Zebra HC100 - Page 79

79
61338M ZebraNet™ 10/100 Print Server Assembly Maintenance Kit
Remove the Media Cartridge
5/8/08 HC100 Maintenance Manual 61311L-001 Rev. A
3. Did the cartridge eject this time?
4. Contact Technical Support. See Contacts on page 9.
If… Then…
Yes a. Remove the media cartridge and set aside.
b. Go to Open the Printer on page 80
No
a. Turn off (O) the power switch.
b. Turn on (l) the power and wait for the printer to power up completely.
c. Press and hold Eject for six seconds.
d. Release Eject.
e. If the cartridge ejected, go to Open the Printer on page 80.
f. If the cartridge did not eject, continue with step 4.