Zebra HC100 - Page 13

13
About This Document
Document Conventions
11/15/10 HC100 User Guide 61207L-002 B
Control Panel Lights The printer status indicator uses green, yellow, and orange lights that
sometimes blink or rotate to indicate the printer’s status and any error conditions. The lights
and light sequences are indicated as follows:
Lights On A solid, colored bar indicates when the printer
status indicator is on.
A solid bar that is divided into two colors indicates
that half of the printer status indicator lights are on
with one color while the other half of the lights are
on with the other color.
Lights Flashing or
Blinking
Alternating colors in a subdivided bar indicate that the lights on the printer
status indicator are flashing or blinking.
• one colored blink
• two colored blinks
• steady color on with two blinks off
• three colored blinks
• four colored blinks
• consistent flashing on and off
• flashing between two colors.
Lights Rotating The printer status indicator lights can light up in a clockwise rotating
sequence.
Rotating lights that come on one at a time are
indicated by a curved, broken arrow and a bar
that shows the color of the lights.
Rotating lights that stay on after lighting up
are indicated by a curved, solid arrow and a
bar that shows the color of the lights.