45
Routine Maintenance
Cleaning the Media Path
11/15/10 HC100 User Guide 61207L-002 B
5. Insert the cleaning card into the media chute as shown until 1/4 in. (6 mm) is visible from
the front of the printer.
6. Close the upper cover.
7. Press and hold EJECT.
8. Turn on (I) the printer power.
9. Hold EJECT for approximately 15 seconds while the printer powers up and performs a
self-test.
10. Release EJECT when the cleaning card begins moving.
The printer uses the cleaning card to clean the media path.
11.
12.
Reinsert the media cartridge.
Caution • The cleaning card contains isopropyl alcohol, a flammable material. After
use, discard according to your local regulations.
Cleaning is complete when the card stops moving and returns to its original position.
When cleaning is completed, remove and dispose of the cleaning card.
To Next Page
Loading...
