Advanced User Information
Viewing Printer Settings
56
61207L-002 B HC100 User Guide 11/15/10
Viewing Printer Settings
The printer configuration wristband provides some basic information about the printer,
particularly about the connectivity settings. If your printer has an active Ethernet wired or
wireless connection, you can view all of the printer’s settings through the printer’s web pages.
On a Printer Configuration Wristband
A printer configuration wristband (Figure 12) shows the printer’s connectivity settings and the
wristband tear-off position. The IP ADDRESS and MAC ADDRESS fields will have values
only if a wired or wireless print server is active. The USB COMM field shows if the printer is
connected to a computer via the USB connector.
Figure 12 • Sample Printer Configuration Wristband
To print a printer configuration wristband, complete these steps:
1. Make sure that the printer is on (I) and ready to print.
2. Press and hold PAUSE/FEED until the green lights turn off on the printer status indicator
and the orange lights blink once.
3. Release PAUSE/FEED.
A printer configuration wristband prints.
To Next Page
Loading...
