6 Zebra P330i & P330m Card Printer User’s Manual 980459-001 Rev D
Installation and Setup
Unpacking the Printer
Unpacking the Printer
Your Card Printer ships in a carton and protective anti-static bag. Keep all packaging material
in case you need to move or re-ship the printer.
Step 1. Inspect the shipping container to ensure that no damage has occurred during
shipment. If any damage is apparent, file a claim with the shipper.
Step 2. Unlatch and remove the handles on either end of the shipping container, as shown in
the figure below.
Step 3. (See the figure on the next page as you perform the following steps.) Lift the upper
part of the shipping container off of the lower part (which will still hold the printer
and its packing material).
P
To Next Page
Loading...
