Cleaning
Cleaning the Printer
980459-001 Rev D Zebra P330i & P330m Card Printer User’s Manual 33
8. The long cleaning card will automatically feed into the printer and the printing process
will continue. The LCD Panel will again display the message CLEANING PRINTER.
9. When the cleaning process is completed, the long cleaning card will be ejected and the
LCD Panel will display the message READY, indicating that the printer is ready to resume
normal printing operations.
10. Discard both cleaning cards after a single use.
Note • If the user does nothing at this point (i.e., does not insert the long cleaning card), after
a time-out the LCD Panel display will change to CLEAN PRINTER. The printer will be able
to print, but the LCD Panel will continue to display CLEAN PRINTER.
This limited cleaning does not do a thorough cleaning, but may be performed if no “long
cleaning cards” are available.
To restore the display to READY, you will need to perform a complete cleaning process,
using both short and long cleaning cards, from step 2 above through step 9 below.
Note • Do not use previously used cleaning cards.
To Next Page
Loading...
