Zebra P4T Quick Start Guide

10
Introduction
Getting Started
Using the
Printer
Troubleshooting
Contact Us
P4T/RP4T Quick Start Guide
Cleaning the Printer
 Caution•Toavoidpossiblepersonalinjuryordamagetotheprinterneverinsertsharporpointedobjectsintotheprintermechanism.
Area Cleaning Method Interval
Printhead
Elements
Use the supplied cleaning pen to clean the print
elements from end to end (the print elements are
located in the thin gray line on the printhead).
After every five rolls of media (or
more often, if needed)
Platen Surface
Rotate the platen roller and clean it thoroughly with
the cleaning pen.
Peeler Bar
Clean thoroughly with the cleaning pen.
As needed
Tear Edge
Exterior Wipe with water-dampened cloth
Interior Brush/air blow. Ensure the Bar Sensor, Gap Sensor
and Label Present Sensor windows and the Media
Support Disks are free of dust.
Printhead
Elements
Label Presence Sensor
Gap
Sensor
Platen Surface
Peeler Bar
Media
Support
Disks
Tear Edge
Bar Sensor

Zebra P4T Specifications

General

Color	No
Maximum resolution	203 x 203 DPI
Core diameter	19 mm
Ribbon length	29992.3 m
Media thickness	0.08 - 0.22 mm
Maximum roll diameter	66 mm
Media thickness (imperial)	0.0032 - 0.0085 \
Bluetooth	Yes
Connectivity technology	Wireless
Battery capacity	4200 mAh
Weight (imperial)	2.9 lbs
Dimensions (WxDxH)	165.9 x 85.9 x 220.5 mm
Flash memory	8 MB
Internal memory	16 MB
Built-in barcodes	Code 39, Code 93, MaxiCode, QR Code, UPC-A, UPC-E
Page description languages	CPCL-native, EPL, EPL2, XML, ZPL
Storage temperature (T-T)	-22 - 149 °F
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Package weight	1900 g