EasyManuals Logo

Zebra P4T Quick Start Guide

Zebra P4T
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Introduction
Getting Started
Using the
Printer
Troubleshooting
Contact Us
P4T/RP4T
Quick Start Guide
Troubleshooting
LCD Control Panel
The top of the display shows icons indicating the status of various printer functions. Check the icon’s status and refer to the referenced
Troubleshooting topic on the following pages.
Icon Status Indication
Ref. to Trou-
bleshooting
Topic
On Bluetooth link established n/a
Off No Bluetooth link 6,8
On 802.11b/g RF Link established n/a
Off No 802.11b/g RF Link 6,8
Number of bars indicates 802.11g signal strength n/a
Outer element flashing Low Battery 4, 6,
Number of bars indicates battery charge level.
Display will cycle through the charge level icons if it is
undergoing a charge from the AC Adapter.
n/a
Alternate Flashing
Battery pack too hot or too cold to
charge
2
Flashing Out of Media 9
Flashing Ribbon Cartridge depleted 9
Flashing Data processing in process n/a
Blank Screen n/a
Battery voltage too low to turn
printer on or no application loaded
1,14
Section Continues
Troubleshooting Topics
1. No power:
•Checkthatbatterypackisinstalledproperly.
•Rechargeorreplacebatterypackasnecessary.
IfthebatteryvoltageisoutsideoftheprintersoperatingrangeandtheACAdapterispluggedintoprinter,theprinterwillnotturn
on. The battery will start to charge, but will give no indication that the battery is charging. When the battery voltage reaches a valid
operating range, the printer will still not turn on unless the user manually turns it on, or unplugs and re-plugs the charge cable.
2. AC Adapter is plugged in and the battery icon is flashing
or :
•Indicationthatthebatteryisoutofitssafechargingtemperaturerange.Chargingwillresumewhenthebatteryreachesasafe
charging temperature.

Other manuals for Zebra P4T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra P4T and is the answer not in the manual?

Zebra P4T Specifications

General IconGeneral
ColorNo
Maximum resolution203 x 203 DPI
Core diameter19 mm
Ribbon length29992.3 m
Media thickness0.08 - 0.22 mm
Maximum roll diameter66 mm
Media thickness (imperial)0.0032 - 0.0085 \
BluetoothYes
Connectivity technologyWireless
Battery capacity4200 mAh
Weight (imperial)2.9 lbs
Dimensions (WxDxH)165.9 x 85.9 x 220.5 mm
Flash memory8 MB
Internal memory16 MB
Built-in barcodesCode 39, Code 93, MaxiCode, QR Code, UPC-A, UPC-E
Page description languagesCPCL-native, EPL, EPL2, XML, ZPL
Storage temperature (T-T)-22 - 149 °F
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Package weight1900 g

Related product manuals