Item
Number
Description Part Number
Kit
Quantity
1 Kit Ribbon Take-Up Spindle Non Peel-Off 44052-400M 1
1 Kit Ribbon Take-Up Spindle Tear 44052-400M 1
2 Washer, RTU, Qty of 25 HW45972 25
3 Kit Dual Tension Ribbon Supply Spindle G44912-400M 1
4 Media Hanger 44069 1
5 Kit Media Edge Guide S600 G44066-1M 1
6 Ground Screw Spacer, RTU Qty of 25 HW33807 25
7 Ribbon Take Up Motor Assembly G44043M 1
8 Ground Chain Assembly 1-3/8 Inch , Qty of 10 HW44481 10
9 Screw HI-LO Short Plastic Cutting or Self Threading, Qty of 50 HW44114 50
10 Screw M4 x 0.7 x 12, Qty of 25 HW10432 25
11 Hex Stand Off Qty of 10 HW44339 10
12 Bevel Gear Ribbon Take Up 44046-2 1
13 Set Screw Nylon Patch M3 x .5 x 6, Qty of 25 HW44100 25
14 Washer, Ribbon Take Up Qty of 25 HW45936 25
15 Shaft Collar Ribbon Take Up .377 x .750 44118 1
To Next Page
Loading...