Zebra Stripe - Page 90

Unacceptable Label:
• Darkness properly set
• Printhead position correct
on left side, way too far
back on right side
• Noisy printing (breakup
on trailing edges of
horizontal bars - splotchy
on right side)
• Toggles balanced (equal
pressure on left and right
sides)
Unacceptable Label:
• Darkness properly set
• Printhead position correct
on left side, too far
forward on right side
• Noisy printing (breakup
on leading edges of
horizontal bars - splotchy
on right side)
• Toggles balanced (equal
pressure on left and right
sides)
Unacceptable Label:
• Darkness properly set
• Printhead position correct
on right side, way too far
forward on left side
• Noisy printing (breakup
on leading edges of
horizontal bars - splotchy
on left side)
• Toggles balanced (equal
pressure on left and right
sides)
Stripe Maintenance Manual: Volume 1 Troubleshooting
44868L Page 6-9