Zebra ZXP 7 series User Manual

14 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
2: Installation and Setup
Installing the Dual Cleaning Cartridge
Step 5. Open the Options Cover.
Step 6. Locate the area where the Dual Cleaning Cartridge will be installed.
Step 7. Hold the cartridge by the extended handle.
Step 8. Insert the lip of the cartridge into the slot, and then push forward until it
snaps into place.
Step 9. If you are also installing the Manual Feed Cleaning Cassette, continue to the next
page; otherwise, close the Options Cover.

Zebra ZXP 7 series Specifications

General

Print Resolution	300 dpi
Connectivity	USB 2.0, Ethernet
Memory	64 MB standard
Print Technology	Dye-sublimation thermal transfer
Card Capacity	200 cards input hopper, 100 cards output hopper
Card Sizes	CR-80 ISO 7810, 2.12" (54 mm) x 3.38" (86 mm)
Power Requirements	100-240 VAC, 50-60 Hz