Zebra ZXP Series 1 User Manual

P1060728-002 Zebra ZXP Series 1 Card Printer User’s Manual 9
2
Printer Installation
Unpacking Your Card Printer
Your ZXP Series 1 Card Printer ships in a cardboard carton, protected by foam inserts and a
protective anti-static bag. Keep all packaging material in case you need to move or re-ship
the printer.
Step 1. Before opening and unpacking the printer, inspect the carton to ensure that no
damage occurred during shipment.
Step 2. Ensure that you have a clean and nearly dust free environment for proper operation
and storage of the printer.
Step 3. Open the carton, and remove the box containing the printer accessories.
Step 4. Lift the printer out of the carton.
Step 5. Remove the protective foam inserts.
Step 6. Make sure the following accessories are included with your printer:
a. Software CD-ROM
b. Quick Start Guide
c. Cleaning Kit
d. Power Cords (one or two depending on the configuration)
e. Power Supply
f. USB Printer Cable
If any items are missing, please contact your Zebra Reseller. To reorder; refer to Appendix E
of this manual.

Zebra ZXP Series 1 Specifications

General

Interface	USB
Print Technology	Dye-sublimation
Image Quality	300 dpi
Card Sizes	CR-80 (85.6mm x 54mm)
Connectivity	USB
Print Resolution	300 dpi
Card Capacity	100-card input hopper
Power Requirements	100-240V AC, 50-60 Hz
Operating Humidity	20% to 80% non-condensing