Zebra ZXP Series 1 User Manual

2 Zebra ZXP Series 1 Card Printer User’s Manual P1060728-002
1: Getting Started
ZXP Series 1 Part Numbers
ZXP Series 1 Part Numbers
The Part Number of a particular Zebra ZXP Series 1 Card Printer is shown on a label affixed to
the bottom of the printer; that Part Number identifies the specific configuration for that printer.
This chart shows the configurations that are available:
PART NUMBER DESCRIPTION
Z1_ -__00________ BASE UNIT
__1-_____ ______
Single-Sided
SMART CARD OPTIONS
___-0___________
None
MAG ENCODER OPTIONS
___-_0__________
None
___-_M__________
ISO HiCo/LoCo Mag S/W-selectable
Interface
___-___0________
USB only
___-___C________
USB and 10/100 Ethernet
SOFTWARE / KIT
___-____0_______
None
___-____G_______
Starter Kit: Monochrome ( Incl: 1 Monochrome Ribbon,
100 PVC Cards )
___-____H_______
Starter Kit: Color ( Incl: 1 YMCKO Ribbon, 100 PVC Cards )
MISCELLANEOUS
___-_____000____
None
___-_______G____
Buy America Act
COUNTRY CODE (power cord option)
___-________00__
No power cords
___-________AP__
Britain
___-________US__
Americas
___-________BR__
Brazil
___-________EM__
EMEA (Europe, the Middle East, and Africa)
___-________AU__
Australia
___-________CN__
China
___-________ IN__
India
___-________TW__
Taiwan
___-________JP__
Japan
CUSTOM CODE
___-__________00
State / Province / Project / Other
ACCESSORIES
P1031925-100 CardSense single-card feed kit, field-upgradable option
105999-302 Cleaning Kit: 4 printer-path and 4 feeder cleaning cards

Zebra ZXP Series 1 Specifications

General

Interface	USB
Print Technology	Dye-sublimation
Image Quality	300 dpi
Card Sizes	CR-80 (85.6mm x 54mm)
Connectivity	USB
Print Resolution	300 dpi
Card Capacity	100-card input hopper
Power Requirements	100-240V AC, 50-60 Hz
Operating Humidity	20% to 80% non-condensing