2: Installation and Setup
Loading Cards
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 9
Step 5. Open the Feeder Cartridge Door, and slide the Card Stack Pusher all the way to the
right, until it locks in place.
Step 6. Place the card stack in the Feeder Cartridge in the correct orientation shown below.
For Cards with a Barcode, see Appendix F for details.
Step 7. For optimum performance, ensure that the cards are fully seated; then close the
Feeder Cartridge Door.
To Next Page
Loading...