52 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
3: Operation
Manual Card Feed
Manual Card Feed
A Manual Feed Slot is available for feeding single cards. Note that this option works with
cards in the Input Hopper.
Access the Card Setup Tab: Select Start > Devices and Printers. Right click on the
Zebra ZXP Series 8 Card Printer listing; and select Printing Preferences > Card Setup.
1. From the Card source dropdown menu, select Single card feed slot (circled above).
2. Click on the Apply button, and then click on the OK button.
3. For demonstration purposes, click on the Test Print button. Note that the Printer may
need to warm up to operating temperature before printing.
To Next Page
Loading...
