3: Operation
Manual Card Feed
P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 53
4. Insert a single card into the slot in the correct orientation. Do not feed more than one card
at a time.
5. The printer will feed in the card and start printing.
6. Once the printing job is complete, the card is ejected from the printer into the
Output Hopper.
Caution • DO NOT bend cards or touch print surfaces as this can reduce print quality.
The surface of the cards must remain clean and dust free. Always store cards in an
enclosed container. Ideally, use cards as soon as possible.
X
✔
✔
To Next Page
Loading...
