Zeiss GOM Scan 1 User Manual

10 Check and Clean the Dust Filter
Check the dust filter on the rear side of the sensor in regular intervals.
GOM recommends cleaning the filter every three months or more often,
depending on the environment. To do so, remove the dirt at the outside of
the filter. For removing the dust, use a standard vacuum cleaner.
Fig. 11: Dust Filters
0000002121_003_EN_01-09-2021 Page 23 (24)

Zeiss GOM Scan 1 Specifications

General

Brand	Zeiss
Model	GOM Scan 1
Category	Measuring Instruments
Language	English