NOTICE
▶
Never connect cables during operation! Never disconnect cables dur‐
ing operation!
NOTICE
Company-specific firewall settings
Company-specific firewall settings of the Ethernet data connections can
cause system failures.
▶
Never change the factory-set firewall for the Ethernet cards for the
cameras or the controller!
NOTICE
Temperature variations can cause condensation.
The ambient temperature must be between +5 °C and +40 °C.
▶
Do not expose the device to rapid temperature variations because
such variations can cause condensation!
▶
Always operate the device within the given temperature range!
NOTICE
When the housing is open, there is risk of electric shock.
Only with the housing closed, the device is ready for operation.
▶
Only open the housing when no voltage is supplied!
NOTICE
Strange objects in the device can jeopardize the operational safety.
Electric shocks and malfunctions can occur.
▶
Do not stick any strange objects into the housing!
NOTICE
Overtemperature causes malfunctions.
▶
Ensure sucient cooling of the device!
▶
Never cover the venting slots!
Important Notes
0000002121_003_EN_01-09-2021 Page 7 (24)
To Next Page
Loading...
