EN 20_070_0009I v1.5
Instructions for use – Part 1
i.Profiler
plus
EN 20_070_0009I v1.5
2021/03/05
© 2021, Carl Zeiss Vision GmbH
Third-party products mentioned in this document are included for information
purposes only and Carl Zeiss Vision does not endorse or recommend these
products, unless explicitly stated otherwise.
Carl Zeiss Vision assumes no liability for the performance or use of these
products.
TRADEMARK is a trademark or registered trademark of LEGAL ENTITY
TRADEMARK OWNER.THIRD PARTY TRADEMARK is a trademark or registered
trademark of THIRD PARTY LEGAL ENTITY TRADEMARK OWNER. All other
trademarks, software and hardware names used in this Instructions for use may
be subject to trademark or copyright protection and are the property of their
respective owners.
This document is protected by copyright. If not expressly approved in writing,
the transmission, duplication, or other use or disclosure of their content -
including in excerpted form - is prohibited. Violations may result in claims for
damages. Carl Zeiss Vision reserves the right to make changes due to further
technical developments. These Instructions for use are not regularly updated.
Please contact the manufacturer or your responsible dealer for the newest
edition.
To Next Page
Loading...
