LSM 710 and LSM 780 NOTES ON DEVICE SAFETY
Systems Warning and Information Labels Carl Zeiss
02/2010 M60-1-0025 e 11
1.7 Warning and Information Labels
The warning and information labels attached on the LSM 710 and LSM 780 systems and
ConfoCor 3 must be observed. Check whether all of the labels shown below are provided on
your instrument, and contact Carl Zeiss Germany or one of the service agencies if you should
discover that any of the labels should be missing. You will receive a free replacement.
Description of labels
Caution:
Faults and hazards that might arise during operation which might cause damage to the unit or
injury to the user.
Attention:
Laser radiation hazards possible when operating the system.
Attention:
High voltage.
Pull the mains plug before opening the device housing.
Caution:
Hot surface.
Caution:
UV radiation.
Caution:
Fingers can be caught.
The arrow points to the opening where laser light comes out during operation of the system.
Other labels on the system include one of the above depicted symbols and a detailed description of
the handling instructions. See also the following drawings of the system parts.
To Next Page
Loading...
