Zenoah G230RC - Special Tools

6. Special Tools
7) SPECIAL TOOLS
Part Name Part No. External Appearance Usage
1 Puller Assy 2890-96100 To remove rotor.
2 Piston Stopper 4810-96220
3 Rod Assy 1101-96220 To remove/install piston pin.
4 Air Gap Gauge 3330-97310 To set ignition coil.
5 Hex Wrench 3304-97611
6 Snap Ring Pliers 5500-96110 To remove snap ring.
To hold crankshaft when
disassembling/assembling
clutch and rotor.
For socket screw of Hex.
3mm, 4mm and 5mm.
8