15
Milano Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
9. (If applicable) If using hood in recirculating mode you must secure the air diverter plate onto wall
before installing duct work and duct covers. Turn to page 16 for more details.
10. Install duct work and seal all joints with certified duct tape.
11. Power up hood and check for leaks around duct tape.
12. Place telescopic duct covers onto hood and extend inner (top) duct cover upwards and secure to
duct cover bracket using (2) M4 x 8 screws.
Mounting the Hood
To Next Page
Loading...
