To Next PageTo Next Page
Need help?Do you have a question about the Zepro ZHD 1500-155 and is the answer not in the manual?
General| Brand | Zepro |
|---|---|
| Model | ZHD 1500-155 |
| Category | Automobile Accessories |
| Language | English |
Ensures adequate clearance for moving parts to prevent collision and ensure safety.
Warns against attaching third-party equipment to Zepro tail lifts.
Detailed steps for mounting the support frame onto the vehicle chassis.
Guidance on making the necessary electrical connections for the lift.
Steps involved in fitting the lift platform to the main structure.
Procedure for installing and connecting the lift's hydraulic cylinders.
Detailed steps for securing the support frame to the vehicle chassis.
Guidance on positioning and fitting the lift control devices.
Instructions for routing and connecting the control power cable.
Procedure for routing and connecting the main power cable to the battery.
Steps for installing underrun protection, including statutory dimensions.
Steps for fitting the platform and tilt cylinders, including adjustments.
Explanation of fault codes, their meanings, and priority.
Identifies lubrication points and recommended greasing frequency.
Procedure for checking and topping up the hydraulic fluid level.
Steps for conducting static load tests to check for deformation and drift.
Guidelines for performing dynamic load tests with maximum and overload conditions.
Checklist for verifying all safety functions of the tail lift.
Details maximum power consumption and recommended conductor sizes.
Specified torque values for various fasteners and assembly points.
