Zepro ZS 150-135 User Manual

ZEPRO
Tel.: +46 (0)10-459 05 00
E-mail: zeprotech@hiab.com | zepro.com
54273TL
2019-11-12
Installation Instruction
Tail Lift
ZS/ZSS
150/200-135/155/175
ZD 150/200-155/175
ZT/ZTS 150/200/250-140
ZS/ZSS 250-135/155

Zepro ZS 150-135 Specifications

General

Brand	Zepro
Model	ZS 150-135
Category	Automobile Accessories
Language	English

Summary

CE Marking Compliance

General Information and Specifications

Technical Description of the Lift System

Explains the electro-hydraulic drive, components, safety valves, and motor.

Hydraulic Oil Specifications

Maximum Power Consumption

Loading Diagrams

Dimensions for Installation

Underrun Protection Requirements

Explains requirements for underrun protection and provides key dimensions.

Slider Installation Procedures

Installation Position and Overhang

Sliding Lift Geometry

Slide Profile Installation

Electrical Installation Guide

Control Devices

Wiring and Power Connections

Electric and Hydraulic Diagrams

System Diagrams

Comprehensive diagram showing electrical and hydraulic connections of the lift system.

Alarm System Wiring

Control Device Connections

Functional Schematic Drawings

Lift Function Schematics

Illustrates functions like Lower, Tilt down, Raise, Tilt up with input/output signals.

Slider Functions and Sensors

Config 3 Functional Schematics

Connection Unit Operation

Control Card and Operating Information

Details the control card, display, LEDs, and power save mode.

Information Codes

Fault Codes

Lists fault codes, their meanings, and priority for troubleshooting.

Maintenance Schedule

Lubrication and Oil Information

Instructions for greasing bearings and platform locks, and information on hydraulic oil types.

Testing the Tail Lift

Static and Deformation Testing

Details static loading tests, deformation checks, and deflection limits.

Dynamic Load and Safety Tests

Procedures for dynamic load testing and verification of safety functions.