Zepter mixSy - Applications;handling; Wrist movement; Drawing up; Blending

6
7
Applications/handling
Wrist movement
Whilst processing, use a light swivelling motion from the wrist
draw mixSy up a little and let it fall again on the ingredients (do
not press or pound). The neness of the result depends on the
length of processing.
Drawing up
Rest the mixSy for a few seconds on the bottom of the jug. Then
hold it at an angle and draw it up slowly against the side of the
jug. When the ingredients no longer are drawn with it put it back
on the bottom and repeat the process until the ingredients are
whipped to the required stiness.
Blending
Dip mixSy at an angle to the ingredients, switch it on and blend.
Before removing the appliance from the ingredients. Switch it
o to prevent splashing.
Tip whilst working: hold your free hand over the top of the jug
to prevent ingredients spraying out.
Switch positions
Speed I for all light airy dishes and small amounts.
Speed II for all viscous, rm ingredients and large amounts.