Remove
battery tab
and discard
Sign in to the Zeptive App and test
unit’s WiFi connection before
installation
First Steps
Wireless ZVD2300 Model
Remove both screws to access
power switch, backup battery pull
tab, and primary battery
Insert fully charged battery into
battery compartment and plug in
USB cable
Slide internal power switch to
the ON position
The ZVD2300 model can operate as either WiFi or PoE, with battery, PoE or mains power. It is good practice to test
connectivity with one or more devices before mounting to the ceiling or wall in their final operating area.
IMPORTANT: Charge main battery overnight prior to installing.
Remove 2 screws to access
power switch, primary battery
bay and backup battery pull tab
IMPORTANT: Allow 24 hours for the device
to acclimate to its environment prior to
testing vape/smoke
To Next Page
Loading...