zeptive ZVD2200 - Placement & Connectivity; Vape Detector Range; Motion Sensor Range

5
Placement & Connectivity
We do not recommend ceiling placement if the ceiling is higher than 9 feet. Consider a wall installation if the ceiling
height exceeds 9 feet. We recommend placement above the center of two to three stalls. If the area is larger, we
recommend multiple devices.
 Will the motion sensor be activated? (See below, Motion Sensor Range)
 Is the area a vaping/smoking hotspot?
 Will the vape cloud be detected?
 Does your device have good Wi-Fi signal?
 Allow 24 hours for the device to acclimate to its environment prior to testing vape/smoke
 Visit www.support.zeptive.com
 Sign in with your login credentials and visit Installation and Setup for more detailed information.
Vape Detector Range
Ceiling Placement Wall Placement
Motion Sensor Range
Ceiling Placement Wall Placement
Closer to the vape
source, the smaller the
cloud, and the higher
the concentration of
chemicals
Farther from the vape
source, the bigger the
cloud, and the lower
the concentration of
chemicals