Controls and Components
3.21
Front Brake Lever Adjuster
The position of the front brake lever can be adjusted by turning
the adjustment knob (A) located on the master cylinder
assembly. Turning the knob clockwise or counter-clockwise will
adjust the distance between the lever and the throttle control.
Parking Brake Operation (if equipped)
Your Zero Motorcycle may be equipped with a parking brake
system. When applied, the parking brake will prevent your
motorcycle from rolling forward or backward.
A. Parking Brake ON
Parking brake lever pointing away from the motorcycle.
B. Parking Brake OFF
Parking brake lever pointing toward the center of the
motorcycle.
Zero Owner's Manual (S and DS).book Page 21 Monday, September 21, 2020 11:43 AM
To Next Page
Loading...
