General Operation
4.8
WARNING! The ABS computer compares the relative speed of
the front and rear wheels. Using tires other than those specified
by Zero Motorcycles can adversely affect the ABS functionality
and stopping distance of your motorcycle.
WARNING! If the ABS warning indicator is illuminated when
traveling at speeds exceeding 3 mph (5 km/h), the ABS is not
functioning. When the ABS system is not functioning, your
motorcycle will operate as a non-ABS equipped motorcycle with
increased stopping distance and unpredictable brake control.
WARNING! If the front and rear wheel speeds vary in speed
significantly, such as during a burnout, wheelie, or off road
riding, the ABS indicator will illuminate and disable ABS.
Note: To reactivate the ABS, bring the motorcycle to a complete
stop, then turn the key to the OFF position, wait for
approximately 5 seconds, then turn it back to the ON position.
The ABS light should extinguish once both wheels reach 3 mph
(5 km/h) and be fully functional.
Zero Owner's Manual (S and DS).book Page 8 Monday, September 21, 2020 11:43 AM
To Next Page
Loading...
