General Operation
4.18
Factory Supplied Rear Suspension Settings
The following information will allow you to adjust the rear
suspension back to the factory settings the motorcycle was
originally supplied with.
Zero S (ZF7.2)
Zero S (ZF14.4) & Zero SR (ZF14.4)
Zero DS ZF7.2
Zero DS (ZF14.4) & Zero DSR ZF14.4
ADJUSTMENT SETTING
Rear Shock Compression 14 clicks counter-clockwise from
maximum (H) position.
Rear Shock Rebound 9 clicks counter-clockwise from
maximum (H) position.
Rear Shock Spring Preload 5th position from minimum
unloaded position.
ADJUSTMENT SETTING
Rear Shock Compression 12 clicks counter-clockwise from
maximum (H) position.
Rear Shock Rebound 6 clicks counter-clockwise from
maximum (H) position.
Rear Shock Spring Preload 5th position from minimum
unloaded position.
ADJUSTMENT SETTING
Rear Shock Compression 10 clicks counter-clockwise from
maximum (H) position.
Rear Shock Rebound 12 clicks counter-clockwise from
maximum (H) position.
Rear Shock Spring Preload 5th position from minimum
unloaded position.
ADJUSTMENT SETTING
Rear Shock Compression 13 clicks counter-clockwise from
maximum (H) position.
Rear Shock Rebound 8 clicks counter-clockwise from
maximum (H) position.
Rear Shock Spring Preload 5th position from minimum
unloaded position.
Zero Owner's Manual (S and DS).book Page 18 Monday, September 21, 2020 11:43 AM
To Next Page
Loading...
