7
PLEASE NOTE: YOUR ZERO-X DRONE COMES WITH A CERTIFIED
ZERO-X USB AC CHARGING ADAPTER FOR 240V CHARGING OF
YOUR DRONE BATTERY. USE OF A NON ZERO-X CERTIFIED USB
AC CHARGING ADAPTER WILL VOID YOUR WARRANTY AND
MAY DAMAGE BOTH YOUR BATTERY AND DRONE.
Connect the drone battery to the charging cable. The light will glow
red indicating charging is in process. The LED on the USB charging
cable will turn off once charging is complete. To keep the battery life
as long as possible, avoid removing the battery from the charging
cable before charging is complete. If you have just finished flying
your drone, please allow the battery to cool down for at least 30
minutes before recharging. When the battery has finished charging
it is advised that the battery is removed from the charger as soon
as possible. Overcharging will damage the battery and effect the
flight time. The battery can take up to 50 minutes to fully charge. If
the battery has been on charge for any longer than 2 hours and the
indicator on the charging cable is not showing that the battery is
charged, please remove the battery from the charger.
To Next Page
Loading...
Need help?
General
