197
MAINTENANCE INSTRUCTIONS
H196 F238
FILLING THE ENGINE WITH OIL
Pour the prescribed quantity of engine oil
into the filling opening (2), start the en-
gine and let it run for 2 - 3 minutes at 750
- 800 rpm.
After stopping of the engine and level
stabilization use the dipstick (1) to check
the oil level and check the cleaner, drain
plug (3) and other joints for leaks.
REPLACING THE FUEL FILTER
ELEMENT
Replace the filter element after releasing
the nut (1) and unscrewing the bowl (2).
During the re-assembly of the cleaned
bowl with the new filter element check
proper seating of the bowl gasket. Bleed
the fuel system.
During the cleaning and replacement of
the filter elements place a suitable vessel
under the engine to catch dripping fuel.
To Next Page
Loading...
