EasyManua.ls Logo

Zetor FORTERRA HSX 100 2014 - Change of the Load Capacity of the Rear Tyres (%); Permitted Combinations of Wheels for Tractors

Zetor FORTERRA HSX 100 2014
250 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
236
MAIN TECHNICAL PARAMETERS
POWER Tractor type
FORTERRA
HSX 100
FORTERRA
HSX 110
FORTERRA
HSX 120
FORTERRA
HSX 130
FORTERRA
HSX 140
Engine type Z 1006 Z 1306 Z 1406 Z 1506 Z 1606
PTO power (kW±2%)
at the nominal engine speed and engaged 1000
rpm of the PTO
Engine in the running-in stage (until 100 hours)
56,2 60,9 68,2 75,4 80,8
Engine after the running-in stage (from 100
hours on)
58,5 63,5 71,0 78,6 84,2
LIFTING FORCE OF THE THREE-POINT
HITCH
Lifting force at the end of the bottom draw-bars
of the rear three-point hitch in the whole lifting
range at the maximum usable pressure (kN).
70
Lifting force at the end of the lower draw-bars of
the front three-point hitch in the whole lifting
range at the maximum usable pressure (kN) -
Zuidberg front three-point hitch
35
TENSILE FORCE
Maximum tensile force (kN) in swinging draw bar
on concrete, tractor in emergency finish with bal-
last weights, with slippage to 15%
39 41 42,5 45 48

Table of Contents

Related product manuals