Zhiyun CRANE 2 - Preparing and Charging the Batteries; Charger & Battery Description

6
Charger & Battery Description
For the first use of CRANE 2, please use the dedicated charging device contained
in the package to fully charge and activate the batteries to ensure the normal use
of the product.
Status Indicator Light
Micro USB Port
(5V power input)
Charger Specifications
Name:18650*3 Li-ion battery charger
Model: ZC-18650-3
Input:5V 2400mA
Output: 4.2V 800mA*3
●Shines solid RED light when charging.
●Shines BLUE light when fully charged.
Battery Specifications
Name:18650 Li-ion battery
Model: IMR 18650
Capacity: 2000mAh
Voltage: 3.7V
Preparing and Charging the Batteries
Notice:
1. Please read the disclaimer and warning herein as well as the description
on the battery label carefully before using the batteries.
2. The ZC-18650-3 charger is for charging ZHIYUN's IMR 18650 Li-ion
Battery only. Do not charge batteries of other models or brands, otherwise
it may lead to accident.
Please use and charge batteries provided or approved by ZHIYUN only.
ZHIYUN will not take any responsibility for explosion, fire and/or accidents
caused by non-ZHIYUN batteries.