16
How to Use
GO Mode (GO):
Press and hold POV Button to enter
The camera pans left/right and tilts up/ down following the movement of the stabilizer in
fast speed while the roll axis is locked.
TransMount 3S EasySling Handle Installation and Detachment
1. Mount Sling Handle Adapter Base to stabilizer with M4 wrench provided.
2. Install EasySling Handle to the adapter base.
3. Fasten EasySling Handle with the toggle on it.
4. When detaching the EasySling Handle, push the toggle to release the handle and
remove adapter base from stabilizer with M4 wrench.
1 2 3
Tilt Axis
Roll Axis
Pan Axis
To Next Page
Loading...
