Usage of Main Accessories
!"#$%&'()*"+*,-. !"#$%&'()*"+*,-
complete the 6-side calibration for specific operations.) procedure following onscreen
illustrations.
/0
NOTICE: All accessories hereunder shall be purchased separately.
Panasonic Camera Control Cable
Compatible Model(s) Panasonic
GH4
Supported Functions
1.Shutter control
2.Video recording
Compatible Stabilizer Model(s)
CRANE, CRANE-M with firmware version of V1.50 and above.
How to Use
Connection
1.Firstly, connect the stabilizer to your PC or smart phone.
2.Configure the stabilizer to suits "Panasonic" in Gimbal Setting Screen, then save the settings.
3.Connect the Micro USB plug (marked "Gimbal") of the Panasonic camera control cable to the
camera connection port on the side of the tilt motor, and then connect the other end of the
control cable to the REMOTE port on the camera.
4. Power on the stabilizer before turning on the camera, otherwise camera remote control may not
work.
Operations
1.Shutter control (including focusing): Press the Power Button to take single shots.
2.Video recording: Double press the Power Button to start video recording, and double press
again to stop recording.
Camera shall be purchased separately.
/1
Compatible Model(s)
Sony RX series, H series, QX series, All Series ILDCs.
Supported Functions
1.Shutter control
To Next Page
Loading...
