Usage of Main Accessories
!"#$%&'()*"+*,-. !"#$%&'()*"+*,-
2.Video recording
3. Zooming
NOTICE: Optical zooming is not supported in case of non-electrical lenses (Recommended electrical
zoom lenses: E PZ 18-105mm F4 GOSS, E PZ 16-50mm F3.5-5.6 OSS).
Compatible Stabilizer Model(s)
CRANE, CRANE-M with firmware version of V1.50 and above.
How to Use
Connection
1.Firstly, connect the stabilizer to your PC or smart phone.
2.Configure the stabilizer to suits "Sony" in Gimbal Setting Screen, then save the settings.
3.Connect the Micro USB plug (marked "Gimbal") of the SONY camera control cable to the
camera connection port on the side of the tilt motor, and then connect the other end of the
control cable to the MULTI port on the camera.
4.Power on the stabilizer before turning on the camera, otherwise camera remote control may not
work.
Operations
1.Shutter control (including focusing): Press the Power Button to take single shots.
2.Video recording: Double press the Power Button to start video recording, and double press again
to stop recording.
3.Zooming: Pushing the Shifter Lever on the stabilizer handle in T direction to zoom out or W
direction to zoom in.
/2
Pairing of Remote Control with the Stabilizer
When using the remote control for the first time, long press the Multi-functional Button while
keeping the remote control near the stabilizer, and at the same time turn the Power Switch ON. The
Bluetooth Indicator shines solid light when matching is successful.
To Next Page
Loading...
