Zhiyun WEEBILL 2 User Manual

8
Installation and Balance Adjustment
3. Loosen the quick release plate latch. Take the quick release plate with the camera
mounted on it and mount it on the stabilizer. Make sure it clicks into the safety
lock, and make sure a firm installation.
When detaching the camera from the
stabilizer, loosen the quick release
plate latch, press the safety lock, and
push out the whole quick release
plate.
2. Mount the camera on the quick
release plate. In order to be stable,
when mounted with a longer or
heavier lens, please mount the
lens support and make sure a firm
installation.

Zhiyun WEEBILL 2 Specifications

General

Operating Voltage	7.4 V
Payload Capacity	3.3 kg
Battery Runtime	9 hours
Charging Time	Approximately 1.6 hours with a 24W charger
Stabilization	3-axis
Connectivity	Bluetooth 5.0, USB-C
Weight	1.47 kg
Battery Capacity	2600 mAh
Compatible Cameras	DSLRs and mirrorless cameras
Control Interface	Touchscreen, buttons
Follow Modes	Pan Follow, Lock, POV, Vortex, Go
Gimbal Type	3-axis handheld gimbal