Zhiyun WEEBILL 2

19
How to Use WEEBILL 2
Stabilizer Mode Description
Pan Follow mode (PF):
The tilt axis and roll axis motors are
locked, and the camera rotates with the
handle while panning horizontally. Push
the joystick up/down to control the tilt axis
angle, and push it left/right to control the
pan axis of the camera.
Motors circled in red are free to move in line with the movement of the stabilizer
handle while motors circled in grey are locked.
Tilt Axis
Roll Axis
Pan Axis
Lock mode (L):
All three motor angles are locked, and the
camera orientation will not move with
the rotation of the handle. Push the
joystick up/down to change the tilt angle
of the camera and left/right to change the
horizontal orientation of the camera.
Tilt Axis
Roll Axis
Pan Axis