5
Battery and Charging
WEEBILL 2 adopts built-in battery. When using for the first time, please
fully charge the battery to ensure the proper function of the stabilizer.
Use provided USB Type-C cable to connect with the USB charger (not provided) to
charge the WEEBILL 2. It is recommended to use USB chargers that meet the PD
policy. (supports 24W at most). When the four indicator lights stay solid, the charging
is completed.
Battery and Charging
AC power
（100-240V）
USB Charger
USB Type-C cable WEEBILL 2
WEEBILL 2 is equipped with batteries of high energy density, which may cause
fire, economic loss or personal injury when improperly stored or handled. Please
read the disclaimer and warning herein as well as the description on the battery
label carefully before using the batteries.
LED 1 LED 2 LED 3 LED 4
<5%
Single Flashing
Red Light
Light Off Light Off Light Off
5%-25%
Solid White
Light
Light Off Light Off Light Off
25%-50%
Solid White
Light
Solid White
Light
Light Off Light Off
50%-75%
Solid White
Light
Solid White
Light
Solid White
Light
Light Off
75%-100%
Solid White
Light
Solid White
Light
Solid White
Light
Solid White
Light
LED
Lights
Battery
Level
To Next Page
Loading...
Need help?
General
