8
Mounting and Balancing
②
①
③
④
⑤
⑥
1. Loosen the quick release plate latch ① , install the lower-layer quick release
plate to the leveling base ② , and tighten the latch ③ . Mount the camera to
the upper-layer quick release plate and tighten the screw with the camera
installation latch ④ . Take the upper-layer quick release plate with the camera
mounted on it and install it wholly to the lower-layer quick release plate ⑤ and
tighten the latch at the upper-layer quick release plate ⑥ .
To Next Page
Loading...
