9
Mounting and Balancing
When detaching, loosen the latch at the upper-layer quick release plate ① ,
then press and hold the upper-layer quick release plate lock switch ② . The
camera and upper-layer quick release plate can then be detached ③ .
③
①
②
2. Install the lens support to the lower-layer quick release plate. Adjust the
height of the lens support according to the lens position. Make sure a firm
installation of the lens and tighten the screw.
To make sure a rm installation of the lens, please install the lens support if
the lens is long and heavy. You can choose to whether install the lens support
according to actual lming scenario.
To Next Page
Loading...
