4
71
B INSTALLATION
The indoor and outdoor units are portable and can easily be moved from one
room to another. They are connected to each other by a 2.5 meter flexible tube.
Ensure that the units are positioned upright and on a level surface.
When handling the units, take the following into account:
INSTALLATION OF THE INDOOR UNIT
Place the loose filters in the filter holder of the indoor unit.
• Take the filter holder out of the air conditioner
• Open the filter holder and place the active carbon filter (black) and 3M™
Filtrete™ filter (white) in the filter holder.
• Place the filter fixing component back in the holder.
• Place the filter holder back in the air conditioner.
Please keep a distance of at least 50 cm between the indoor unit and the wall
or other objects to ensure proper air circulation.
Do not operate the unit inside the bathroom, shower, or in any other very
humid envir
onment.
G
W
ARNING
The air must flow freely through the indoor unit. Any blockage can lead
to damage or impr
oper operation of the air conditioner
.
G
WARNING
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
G
WARNING
• Don’t lift, or move by pushing, the air conditioner at the back side,
but always at the front side (see pictures).
G
A
TTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
To Next Page
Loading...
