7
. CANCELLING THE TIMER FUNCTION
In order to cancel the timer programming press the push button momentarily,
then it will return to the time display. The daily mode will be cancelled as well.
The black segments in the circular time scale will disappear.
8
. AIRFLOW
Direct the airflow by adjusting the grill on top of the air conditioner. Move the
grill, by pushing or pulling, in the middle (see illustration). This to avoid a false
position of the grill. Adjusting the airflow is as well possible by moving the
direction of the vertical louvers.
9. SLEEP MODE FUNCTION
The sleep mode function adjusts the set temperature of the unit to the thermal
needs of the body falling asleep as follow:
• In the COOL or AUTO COOL mode
The set temperature will increase 1ºC after 1 hour and a further 1ºC after 2
hours.
• No FAN mode under SLEEP mode operation
• Default fan speed: LOW
Press the push button to operate the sleep mode.
Press the push button again in order to cancel the sleep mode.
10. DEHUMIDIFICATION
Under normal circumstances the condensation water is pumped to the outdoor
unit through the connection tube. When the waterflow is blocked or the position
of the outdoor unit is to high, water may accumulate in the indoor water
container of the unit.
See chapter E for instructions regarding drainage of the internal water container.
D AIR FILTER
This air conditioner is equipped with a 3 layer filter to clean the circulated room
air.
a. Screen filter; to remove bigger dust particles.
b. 3M™ Filtrete™ filter; to remove unhealthy particles from the air such as
pollen, bacteria, animal dander and dust.
c.
Active carbon filter; to remove odours.
G
NOTE!
The active carbon filter and the 3M™ Filtrete™ filter are delivered in a
plastic packaging. Don’t forget to install these filters. These filters take
away unhealthy particles out of the room environment.
To Next Page
Loading...
