48
Cautions: Always remove the Handpiece Activation Lever when
operating the handpiece by the Footswitch.
If the Handpiece Activation Lever has not been removed, and the
Footswitch is in use, depressing the Activation Lever will not control the
handpiece until use of the Footswitch has been discontinued.
Note: The Handpiece Activation
Lever Cover (5020-070) can be
attached to the area where the
Activation Lever was disengaged.
Note: If the Activation Lever
provided with a handpiece is too
short to operate in a comfortable
position, remove the lever and
attach the XL Handpiece
Activation Lever (5020-059).
WARNING: XL Handpiece
Activation Lever cannot be used
with the Sagittal Saw. Personal
injury may result.
To Next Page
Loading...
