51
3. Attach the Irrigation Cord to
the front of the Irrigation
Pump. Connect the remaining
end of the cord to the
Irrigation receptacle on the
MicroChoice™ Controller.
4. Fully assemble Irrigation
Tubing to the Irrigation Pump
and the Handpiece Cord.
5. Push Handpiece Clip on the
handpiece.
6. Attach the proper Irrigation
Tip to the nose of the bur
guard, Angled Attachment or
saw. Connect the Irrigation
Tubing to the Irrigation Tip.
Press the Irrigation Tip into the
correct slot on the Handpiece
Clip for a low profile and
secure hold.
To Next Page
Loading...
