62
Protective Grounding: All models use ground protection. Use only with
grounded line or mains supply and medical grade cord set (5039-003 AC
Power Cord).
Voltage Selection Means: Each Controller is factory pre-set for a specific
voltage range. Make sure you have the correct setting for your local line
(mains) supply. However, should there ever be a need for changing this
requirement, the following instructions should be utilized:
1. Turn power off, and disconnect the main power cord.
2. Remove the fuse holder.
3. The voltage regulator can
then be removed, rotated,
and reinserted with the
correct selection. The
voltage selected will be
displayed through the
opening in the fuse holder.
Control Panel Features: A digital display on the front panel of the
Controller provides information on handpiece type in use, handpiece speeds,
and control system malfunctions. This display, in conjunction with a Mode
Select Button on the Handpiece Cord, is also used to change menu selectable
features described on pages 38 through 48 of this manual. Read these pages
for a full explanation of how to set menu selectable features prior to placing
the system in use.
To Next Page
Loading...
