ZIMO MS440C - Scripts for Decoders, Short Description

Page 82 MS - SOUND decoders MS440 to MS990 and MN - NON-SOUND decoders MN170 to MN340
9 Scripts for decoders, short description
ZIMO decoders contain many features ... and more are added with time. A lot, but not everything re-
garding the decoder configuration, especially concerning sound sequences, can be displayed with CVs
without any problems. Therefore, in cooperation with external partners - especially the sound providers
- the scripts were introduced.
In the currently existing form scripts are NOT directly programmable (e.g. via PoM), but only available
as part of sound projects. In the software ZSP ("ZIMO Sound Programmer") there is an editor for
creating scripts.
In the following (right) the first page of the special instruction for "ZSP-Scripts" is shown (state of printing:
01/2020):
www.zimo.at, / Manuals / ZIMO User Manuals / Row „ZSP“ / English User Manual
CV
Bezeichnung
Bereich
Default
Beschreibung
#837
Deactivation scripts
1 - 8
0
Bit 0 - 7 = 1: Deaktivate Script 1 - 8
#843
Deactivation scripts
9 - 16
0
Bit 0 – 7 = 1: Deactivate script 9 - 16